Manufacturer : Condenser and Heat Exchanger Tubes, Pipes
Home Red Brass Pipes
product-details

Red Brass Pipes

Description & Documents  

Description

CATEGORY ASTM BS EN JIS DIN ISO IS
Silicon Red Brass C69400 IS 11109 Grade 1
Silicon Red Brass C69430 IS 11109 Grade 1
Silicon Brass CW708R 2.049
Cuzn31Si1
80 / 20 Red Brass C22000 Cz101 Cw501L 2.023 Cuzn20

Red Brass Pipe

C22000 Red Brass Pipe

CuZn10 has very good cold forming properties and is well suited for e.g. coinage, beating, embossing. This alloy has a higher strength as pure copper. It has good welding and brazing properties as well as a good corrosion resistant and is not fragile to stress corrosion and dezincification. CuZn10 is principally used in jewelry, metal goods, and watch industry and in electronic industry for installation parts. We produce qualities with grain sizes below 5 mm if needed.

Typical Applications:

  • Architecture: Weather Stripping, Screen Cloth, Ornamental Trim, Etching Bronze, Grill Work. Builders Hardware: Kick Plates, Hardware. Consumer: Housing for Lipstick Compacts, Costume Jewelry, Caskets, Ball Point Pens. Electrical: Wave Guides, Rotor Bar-AC Motors, Cable Warp. Fasteners: Screw Shells, Bolts, Line Clamps, Rivets. Industrial: Base for Vitreous Enamel, Escutcheons, Flexible Tube, Studs. Marine: Marine Hardware. Ordnance: Small Arms Cartridges, Artillery Projectile Rotating Bands, Press Fit, Primer Caps. Plumbing: Plumbers Brass Goods Typical Applications: Jewelry and metal good, Components for the electrical industry, Lead frames.
Equivalent Specifications

SPECIFICATIONS DESIGNATION
EN CuZn10
DIN CW501L
UNS C22000
BS CZ101

Chemical Composition

Cu Pb Fe Zn
Min/Max 89.0-91.0 0.05 0.05 Rem
Nominals 90.0 – – 10.0

Physical Properties

Density 0.318 Lb/In3 At 68 F
Electrical Conductivity 44 %IACS @ 68 F
Thermal Conductivity 109 BTU In/Hr.Ft2.°F @ 68 F

Mechanical Properties

Temper Tensile Strength Rm [Ksi] [MPa] Yield Strength Rp0.2 Nominal [Ksi] [MPa] Elon Gation 2” Nominal [%] Hardness Nominal R30T HV Min Bend Ratio 90° Min Bend Ratio 180°
GW BW GW BW
Soft 36-42
248-290		 12
83		 47 0 0 0 0
H02 47-57
324-393		 47
324		 12 57 0 0 1.0 1.0
H04 57-66
393-455		 58
400		 4 66 0 1.0 1.5 3.0
H06 64-72
441-497		 63
435		 4 68 1.0 2.0 1.5
H06 64-72
441-497		 63
435		 4 68 1.0 2.0 1.5
H08 69-77
476-531		 68
469		 1 69 1.5 2.0
H10 72-80
497-552		 70
483		 1 70 1.5 3.0

Sizes Available

ROUND RODS/RODS 6mm To 130 Mm
HEX 5mm To 60mm
SQUARE 4mm To 60mm
FLAT 5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS AS Per Customer Drawing
BILLETS Up To 200 Mm
INGOTS AS Per Specification
CATEGORY
 ASTM BS EN JIS DIN ISO IS
85 / 15 Red Brass C23000 Cz102 Cw502L 2.024 Cuzn15

C23000 Red Brass Pipe

23000 brass is the most durable of all metals for commercial water pipe in the practical price range. Excellent for its resistance to dezincification and season cracking for which the high copper brasses are known. Moderate strength and good retention of spring properties. Specified for underground service lines since it offers greatest corrosion resistance to all types of portable waters. Applications for C23000 brass include costume jewelry, fire hose couplings, zippers, and condenser and heat exchanger tubes. Popular as an outdoor metal and has found for itself a very important place in modern architecture. also known as Nordic Brass. The EN equivalent for this alloy is CuZn15.
Typical Applications:

  • Architecture: etching parts, trim, weather strip, Builders Hardware: kick plates, Consumer: badges, coinage, compacts, costume jewelry, dials, fire extinguisher cases, lipstick containers, medallions, nameplates, plaques, rouge boxes, tokens, zippers, Electrical: conduit, rotor bars (AC motors), screw shells, sockets Fasteners: eyelets, fasteners, Industrial: condenser tubes, fire extinguishers, flexible metal hose, heat exchanger shells, heat exchangers, pickling crates, pump cylinder liners, radiator cores, tags, tubing for heat exchangers, tubing for instrumentation, Other fire hose couplings Plumbing fittings, j-bends, pipe, pipe nipples, pipe service lines, pump lines, service lines, traps
Equivalent Specifications

SPECIFICATIONS DESIGNATION
EN CuZn15
DIN CW502L
UNS C23000
BS CZ102

Chemical Composition

Cu Pb Fe Zn
Min/Max 84.0-86.0 0.05 0.05 Rem
Nominals 85.0 – – 5.0

Physical Properties

Density 0.316 Lb/In3 At 68 F
Electrical Conductivity 37 %IACS @ 68 F
Thermal Conductivity 92 BTU In/Hr.Ft2.°F @ 68°F

Mechanical Properties

Temper Tensile Strength Rm [Ksi] [MPa] Yield Strength Rp0.2 Nominal [Ksi] [MPa] Elon Gation 2” Nominal [%] Hardness Nominal R30T HV Min Bend Ratio 90° Min Bend Ratio 180°
GW BW GW BW
Soft 39-47
269-324		 13
90		 45 – 0 0 0 0
H02 51-61
352-421		 49
338		 18 105 0 0 0.5 1.5
H04 63-72
435-497		 62
428		 7 135 0 1.5 2.0 4.0
H06 72-80
497-552		 69
476		 4 150 1.5 – 2.5 –
H08 78-86
538-593		 73
504		 3 160 2.5 – 4.0 –
H10 82-90
566-621		 76
524		 1 170 – – – –

Sizes Available

ROUND RODS/RODS 6mm To 130 Mm
HEX 5mm To 60mm
SQUARE 4mm To 60mm
FLAT 5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS AS Per Customer Drawing
BILLETS Up To 200 Mm
INGOTS AS Per Specification

C24000 Red Brass Pipe

Red Brass with a nominal composition of 80 % copper and 20 % zinc approaches the mechanical properties of CuZn30 but with corrosion properties only slightly inferior to CuZn15. This alloy has a color between yellow and golden red and finds distinctive uses in decorative trim applications. Its color and tonal qualities prove advantageous for musical instruments. Thermostatic and instrument bellows and flexible hose utilize the combined ductility, strength and corrosion resistance characteristics of this alloy.

Typical Applications:

  • Architecture: medallions, ornamental components, spandrels Builders Hardware: decorative panels Consumer: clock dials, musical instrument parts, plaques Electrical: battery caps, rotor bars for AC motors Industrial: flexible hose, flexible hose bellows, pump lines, welding wire other tokens
Equivalent Specifications

SPECIFICATIONS DESIGNATION
EN CuZn20
DIN CW503L
UNS C24000
BS CZ103

Chemical Composition

Cu Pb Fe Zn
Min/Max 78.5-81.5 0.05 0.05 Rem
Nominals 80.0 – – 20.0

Physical Properties

Density 0.313 Lb/In3 At 68 F
Electrical Conductivity 32 %IACS @ 68 F
Thermal Conductivity 81 BTU In/Hr.Ft2.°F @ 68 F

Mechanical Properties –

Temper Tensile Strength Rm [Ksi] [MPa] Yield Strength Rp0.2 Nominal [Ksi] [MPa] Elon Gation 2” Nominal [%] Hardness Nominal R30T HV Min Bend Ratio 90° Min Bend Ratio 180°
GW BW GW BW
Soft 44-54
305-373		 20
138		 50 – 0 0 0 0
H02 55-65
379-448		 42
290		 18 62 0 0 1.0 1.5
H04 68-77
469-531		 61
421		 4 71 0 0 1.5 3.0
H06 78-87
538-600		 68
469		 2 75 0.5 1.5 2.0
H08 85-93
586-642		 76
524		 1 77 1.5 – 4.0 –
H10 89-97
614-669		 78
548		 1 78 3.0 – – –

Sizes Available

ROUND RODS/RODS 6mm To 130 Mm
HEX 5mm To 60mm
SQUARE 4mm To 60mm
FLAT 5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS AS Per Customer Drawing
BILLETS Up To 200 Mm
INGOTS AS Per Specification

C69400 Silicon Red Brass Pipe

Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Applications:

  • Condenser Tube, Evaporator Tubes, Ferrules, Distiller Tubes, Heat Exchanger Tubes
Equivalent Specifications

SPECIFICATIONS DESIGNATION
ISO CuZn20Al2
Europen CuZn20Al2
BS CZ 110
JIS C6870
Russian LAMs77-2-0.05

Chemical Composition

Cu Fe Pb Sn Zn
Min/Max 80-83 0.2 Max 0.3 Max 3.5-4.5 Rem

Physical Properties

Tensile Strength Up To 25mm 550 MPA
Elongation 15% Min

Sizes Available

WIRE 1mm To 8mm
HOLLOW RODS Min Bore Size 20 Mm And Max OD 100 Mm
ROUND RODS/RODS 6mm To 130 Mm
HEX 5mm To 60mm
SQUARE 4mm To 60mm
FLAT 5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS AS Per Customer Drawing
BILLETS Up To 200 Mm
INGOTS AS Per Specification
CATEGORY
 ASTM BS EN JIS DIN ISO IS
90 / 10 Red Brass C24000 Cz103 Cw503L 2.025 Cuzn10

90/10 Red Brass Tubes

CuZn10 has very good cold forming properties and is well suited for e.g. coinage, beating, embossing. This alloy has a higher strength as pure copper. It has good welding and brazing properties as well as a good corrosion resistant and is not fragile to stress corrosion and dezincification. CuZn10 is principally used in jewelry, metal goods, and watch industry and in electronic industry for installation parts. We produce qualities with grain sizes below 5 mm if needed.

Typical Applications:

  • Architecture: Weather Stripping, Screen Cloth, Ornamental Trim, Etching Bronze, Grill Work. Builders Hardware: Kick Plates, Hardware. Consumer: Housing for Lipstick Compacts, Costume Jewelry, Caskets, Ball Point Pens. Electrical: Wave Guides, Rotor Bar-AC Motors, Cable Warp. Fasteners: Screw Shells, Bolts, Line Clamps, Rivets. Industrial: Base for Vitreous Enamel, Escutcheons, Flexible Tube, Studs. Marine: Marine Hardware. Ordnance: Small Arms Cartridges, Artillery Projectile Rotating Bands, Press Fit, Primer Caps. Plumbing: Plumbers Brass Goods Typical Applications: Jewelry and metal good, Components for the electrical industry, Lead frames.
Equivalent Specifications

SPECIFICATIONS DESIGNATION
EN CuZn10
DIN CW501L
UNS C22000
BS CZ101

Chemical Composition

Cu Pb Fe Zn
Min/Max 89.0-91.0 0.05 0.05 Rem
Nominals 90.0 – – 10.0

Physical Properties

Density 0.318 Lb/In3 At 68 F
Electrical Conductivity 44 %IACS @ 68 F
Thermal Conductivity 109 BTU In/Hr.Ft2.°F @ 68 F

Mechanical Properties

Temper Tensile Strength Rm [Ksi] [MPa] Yield Strength Rp0.2 Nominal [Ksi] [MPa] Elon Gation 2” Nominal [%] Hardness Nominal R30T HV Min Bend Ratio 90° Min Bend Ratio 180°
GW BW GW BW
Soft 36-42
248-290		 12
83		 47 0 0 0 0
H02 47-57
324-393		 47
324		 12 57 0 0 1.0 1.0
H04 57-66
393-455		 58
400		 4 66 0 1.0 1.5 3.0
H06 64-72
441-497		 63
435		 4 68 1.0 2.0 1.5
H06 64-72
441-497		 63
435		 4 68 1.0 2.0 1.5
H08 69-77
476-531		 68
469		 1 69 1.5 2.0
H10 72-80
497-552		 70
483		 1 70 1.5 3.0

Sizes Available

ROUND RODS/RODS 6mm To 130 Mm
HEX 5mm To 60mm
SQUARE 4mm To 60mm
FLAT 5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS AS Per Customer Drawing
BILLETS Up To 200 Mm
INGOTS AS Per Specification

85/15 Red Brass Tubes

C23000 brass is the most durable of all metals for commercial water pipe in the practical price range. Excellent for its resistance to dezincification and season cracking for which the high copper brasses are known. Moderate strength and good retention of spring properties. Specified for underground service lines since it offers greatest corrosion resistance to all types of portable waters. Applications for C23000 brass include costume jewelry, fire hose couplings, zippers, and condenser and heat exchanger tubes. Popular as an outdoor metal and has found for itself a very important place in modern architecture. also known as Nordic Brass. The EN equivalent for this alloy is CuZn15.

Typical Applications:

  • Architecture: etching parts, trim, weather strip, Builders Hardware: kick plates, Consumer: badges, coinage, compacts, costume jewelry, dials, fire extinguisher cases, lipstick containers, medallions, nameplates, plaques, rouge boxes, tokens, zippers, Electrical: conduit, rotor bars (AC motors), screw shells, sockets Fasteners: eyelets, fasteners, Industrial: condenser tubes, fire extinguishers, flexible metal hose, heat exchanger shells, heat exchangers, pickling crates, pump cylinder liners, radiator cores, tags, tubing for heat exchangers, tubing for instrumentation, Other fire hose couplings Plumbing fittings, j-bends, pipe, pipe nipples, pipe service lines, pump lines, service lines, traps
Equivalent Specifications

SPECIFICATIONS DESIGNATION
EN CuZn15
DIN CW502L
UNS C23000
BS CZ102

Chemical Composition

Cu Pb Fe Zn
Min/Max 84.0-86.0 0.05 0.05 Rem
Nominals 85.0 – – 5.0

Physical Properties

Density 0.316 Lb/In3 At 68 F
Electrical Conductivity 37 %IACS @ 68 F
Thermal Conductivity 92 BTU In/Hr.Ft2.°F @ 68°F

Mechanical Properties

Temper Tensile Strength Rm [Ksi] [MPa] Yield Strength Rp0.2 Nominal [Ksi] [MPa] Elon Gation 2” Nominal [%] Hardness Nominal R30T HV Min Bend Ratio 90° Min Bend Ratio 180°
GW BW GW BW
Soft 39-47
269-324		 13
90		 45 – 0 0 0 0
H02 51-61
352-421		 49
338		 18 105 0 0 0.5 1.5
H04 63-72
435-497		 62
428		 7 135 0 1.5 2.0 4.0
H06 72-80
497-552		 69
476		 4 150 1.5 – 2.5 –
H08 78-86
538-593		 73
504		 3 160 2.5 – 4.0 –
H10 82-90
566-621		 76
524		 1 170 – – – –

Sizes Available

ROUND RODS/RODS 6mm To 130 Mm
HEX 5mm To 60mm
SQUARE 4mm To 60mm
FLAT 5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS AS Per Customer Drawing
BILLETS Up To 200 Mm
INGOTS AS Per Specification

80/20 Red Brass Tubes

Red Brass with a nominal composition of 80 % copper and 20 % zinc approaches the mechanical properties of CuZn30 but with corrosion properties only slightly inferior to CuZn15. This alloy has a color between yellow and golden red and finds distinctive uses in decorative trim applications. Its color and tonal qualities prove advantageous for musical instruments. Thermostatic and instrument bellows and flexible hose utilize the combined ductility, strength and corrosion resistance characteristics of this alloy.

Typical Applications:

  • Architecture: medallions, ornamental components, spandrels Builders Hardware: decorative panels Consumer: clock dials, musical instrument parts, plaques Electrical: battery caps, rotor bars for AC motors Industrial: flexible hose, flexible hose bellows, pump lines, welding wire other tokens
Equivalent Specifications

SPECIFICATIONS DESIGNATION
EN CuZn20
DIN CW503L
UNS C24000
BS CZ103

Chemical Composition

Cu Pb Fe Zn
Min/Max 78.5-81.5 0.05 0.05 Rem
Nominals 80.0 – – 20.0

Physical Properties

Density 0.313 Lb/In3 At 68 F
Electrical Conductivity 32 %IACS @ 68 F
Thermal Conductivity 81 BTU In/Hr.Ft2.°F @ 68 F

Mechanical Properties –

Temper Tensile Strength Rm [Ksi] [MPa] Yield Strength Rp0.2 Nominal [Ksi] [MPa] Elon Gation 2” Nominal [%] Hardness Nominal R30T HV Min Bend Ratio 90° Min Bend Ratio 180°
GW BW GW BW
Soft 44-54
305-373		 20
138		 50 – 0 0 0 0
H02 55-65
379-448		 42
290		 18 62 0 0 1.0 1.5
H04 68-77
469-531		 61
421		 4 71 0 0 1.5 3.0
H06 78-87
538-600		 68
469		 2 75 0.5 1.5 2.0
H08 85-93
586-642		 76
524		 1 77 1.5 – 4.0 –
H10 89-97
614-669		 78
548		 1 78 3.0 – – –

Sizes Available

ROUND RODS/RODS 6mm To 130 Mm
HEX 5mm To 60mm
SQUARE 4mm To 60mm
FLAT 5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS AS Per Customer Drawing
BILLETS Up To 200 Mm
INGOTS AS Per Specification

Astm B134 Red Brass Tubes

Red Brass with a nominal composition of 80 % copper and 20 % zinc approaches the mechanical properties of CuZn30 but with corrosion properties only slightly inferior to CuZn15. This alloy has a color between yellow and golden red and finds distinctive uses in decorative trim applications. Its color and tonal qualities prove advantageous for musical instruments. Thermostatic and instrument bellows and flexible hose utilize the combined ductility, strength and corrosion resistance characteristics of this alloy.

Typical Applications:

  • Architecture: medallions, ornamental components, spandrels Builders Hardware: decorative panels Consumer: clock dials, musical instrument parts, plaques Electrical: battery caps, rotor bars for AC motors Industrial: flexible hose, flexible hose bellows, pump lines, welding wire other tokens
Equivalent Specifications

SPECIFICATIONS DESIGNATION
EN CuZn20
DIN CW503L
UNS C24000
BS CZ103

Chemical Composition

Cu Pb Fe Zn
Min/Max 78.5-81.5 0.05 0.05 Rem
Nominals 80.0 – – 20.0

Physical Properties

Density 0.313 Lb/In3 At 68 F
Electrical Conductivity 32 %IACS @ 68 F
Thermal Conductivity 81 BTU In/Hr.Ft2.°F @ 68 F

Mechanical Properties –

Temper Tensile Strength Rm [Ksi] [MPa] Yield Strength Rp0.2 Nominal [Ksi] [MPa] Elon Gation 2” Nominal [%] Hardness Nominal R30T HV Min Bend Ratio 90° Min Bend Ratio 180°
GW BW GW BW
Soft 44-54
305-373		 20
138		 50 – 0 0 0 0
H02 55-65
379-448		 42
290		 18 62 0 0 1.0 1.5
H04 68-77
469-531		 61
421		 4 71 0 0 1.5 3.0
H06 78-87
538-600		 68
469		 2 75 0.5 1.5 2.0
H08 85-93
586-642		 76
524		 1 77 1.5 – 4.0 –
H10 89-97
614-669		 78
548		 1 78 3.0 – – –

Sizes Available

ROUND RODS/RODS 1mm To 130 Mm
HEX 5mm To 60mm
SQUARE 5mm To 60mm
FLAT 5mm Min Thickness And Max Width 120mm
BILLETS Up To 200 Mm
TUBES 9.5 Mm To 76.20 Mm

 

Latest Product

24 x 7 Product Expert Help Support
We accept Custom Grades
+91-93281 05180
whatsapp