Aluminium Brass Tubes, Get Best Offer Price For Aluminium Brass Tubes, Pipes, A Leader Brand From India Engaged in Manufacturing, and Exporter, Ask For Best offer Price.
A Copper Zinc Alloy containing Aluminum and small amount of Arsenic which is added as an inhibitor against dezincification. Inhibited Aluminum brass resists the action of high velocity salt and brackish water and is commonly used for condensor tubes. The outstanding characteristics of aluminum brass is the high resistance to impingement attack. Tubes of this alloy are recommended for use in marine and land power stations where cooling water velocities are high and where inhibited admiralty brass has failed from impingement.
Typical Applications:
Condenser Tube, Evaporator Tubes, Ferrules, Distiller Tubes, Heat Exchanger Tubes
Equivalent Specifications
| SPECIFICATIONS | DESIGNATION |
| ISO | CuZn20Al2 |
| Europen | CuZn20Al2 |
| BS | CZ 110 |
| JIS | C6870 |
| Russian | LAMs77-2-0.05 |
Chemical Composition
| Al | As | Cu | Fe | Pb | Zn | |
| Min/Max | 1.8 – 2.5 | 0.02 – 0.06 | 76.0 – 79.0 | 0.06 | 0.07 | Rem |
| Nominals | 2.0000 | 0.0400 | 77.5000 | – | – | 20.5000 |
Physical Properties
| Coefficient Of Thermal Expansion | 10.3 10−6Per °F (68-572 F) |
| Density | 0.301 Lb/In3 At 68 F |
| Electrical Conductivity | 23 %IACS @ 68 F |
| Electrical Resistivity | 45.1 Ohms-Cmil/Ft @ 68 F |
| Melting Point Liquid US | 1780 F |
| Melting Point Solid US | 1710 F |
| Modulas Of Elasticity In Tension | 16000 Ksi |
| Modulas Of Rigidity | 6000 Ksi |
| Specific Gravity | 8.33 |
| Specific Heat Capacity | 0.09 Btu/Lb/°F @ 68 F |
| Thermal Conductivity | 58.0 BTU In/Hr.Ft2.°F @ 68 F |
Sizes Available
| HOLLOW RODS | Min Bore Size 20 Mm And Max OD 100 Mm |
| ROUND RODS/RODS | 6mm To 130 Mm |
| HEX | 5mm To 60mm |
| SQUARE | 4mm To 60mm |
| FLAT | 5mm Min Thickness And Max Width 120mm |
| PROFILES / SECTIONS | AS Per Customer Drawing |
| BILLETS | Up To 200 Mm |
| INGOTS | AS Per Specification |
A Copper Zinc Alloy containing Aluminum and small amount of Arsenic which is added as an inhibitor against dezincification. Inhibited Aluminum brass resists the action of high velocity salt and brackish water and is commonly used for condensor tubes. The outstanding characteristics of aluminum brass is the high resistance to impingement attack. Tubes of this alloy are recommended for use in marine and land power stations where cooling water velocities are high and where inhibited admiralty brass has failed from impingement.
Typical Applications:
Condenser Tube, Evaporator Tubes, Ferrules, Distiller Tubes, Heat Exchanger Tubes
Equivalent Specifications
| SPECIFICATIONS | DESIGNATION |
| ISO | CuZn20Al2 |
| Europen | CuZn20Al2 |
| BS | CZ 110 |
| JIS | C6870 |
| Russian | LAMs77-2-0.05 |
Chemical Composition
| Al | As | Cu | Fe | Pb | Zn | |
| Min/Max | 1.8 – 2.5 | 0.02 – 0.06 | 76.0 – 79.0 | 0.06 | 0.07 | Rem |
| Nominals | 2.0000 | 0.0400 | 77.5000 | – | – | 20.5000 |
Physical Properties
| Coefficient Of Thermal Expansion | 10.3 10−6Per °F (68-572 F) |
| Density | 0.301 Lb/In3 At 68 F |
| Electrical Conductivity | 23 %IACS @ 68 F |
| Electrical Resistivity | 45.1 Ohms-Cmil/Ft @ 68 F |
| Melting Point Liquid US | 1780 F |
| Melting Point Solid US | 1710 F |
| Modulas Of Elasticity In Tension | 16000 Ksi |
| Modulas Of Rigidity | 6000 Ksi |
| Specific Gravity | 8.33 |
| Specific Heat Capacity | 0.09 Btu/Lb/°F @ 68 F |
| Thermal Conductivity | 58.0 BTU In/Hr.Ft2.°F @ 68 F |
Sizes Available
| HOLLOW RODS | Min Bore Size 20 Mm And Max OD 100 Mm |
| ROUND RODS/RODS | 6mm To 130 Mm |
| HEX | 5mm To 60mm |
| SQUARE | 4mm To 60mm |
| FLAT | 5mm Min Thickness And Max Width 120mm |
| PROFILES / SECTIONS | AS Per Customer Drawing |
| BILLETS | Up To 200 Mm |
| INGOTS | AS Per Specification |
A Copper Zinc Alloy containing Aluminum and small amount of Arsenic which is added as an inhibitor against dezincification. Inhibited Aluminum brass resists the action of high velocity salt and brackish water and is commonly used for condensor tubes. The outstanding characteristics of aluminum brass is the high resistance to impingement attack. Tubes of this alloy are recommended for use in marine and land power stations where cooling water velocities are high and where inhibited admiralty brass has failed from impingement.
Typical Applications:
Condenser Tube, Evaporator Tubes, Ferrules, Distiller Tubes, Heat Exchanger Tubes
Equivalent Specifications
| SPECIFICATIONS | DESIGNATION |
| ISO | CuZn20Al2 |
| Europen | CuZn20Al2 |
| BS | CZ 110 |
| JIS | C6870 |
| Russian | LAMs77-2-0.05 |
Chemical Composition
| Al | As | Cu | Fe | Pb | Zn | |
| Min/Max | 1.8 – 2.5 | 0.02 – 0.06 | 76.0 – 79.0 | 0.06 | 0.07 | Rem |
| Nominals | 2.0000 | 0.0400 | 77.5000 | – | – | 20.5000 |
Physical Properties
| Coefficient Of Thermal Expansion | 10.3 10−6Per °F (68-572 F) |
| Density | 0.301 Lb/In3 At 68 F |
| Electrical Conductivity | 23 %IACS @ 68 F |
| Electrical Resistivity | 45.1 Ohms-Cmil/Ft @ 68 F |
| Melting Point Liquid US | 1780 F |
| Melting Point Solid US | 1710 F |
| Modulas Of Elasticity In Tension | 16000 Ksi |
| Modulas Of Rigidity | 6000 Ksi |
| Specific Gravity | 8.33 |
| Specific Heat Capacity | 0.09 Btu/Lb/°F @ 68 F |
| Thermal Conductivity | 58.0 BTU In/Hr.Ft2.°F @ 68 F |
Sizes Available
| HOLLOW RODS | Min Bore Size 20 Mm And Max OD 100 Mm |
| ROUND RODS/RODS | 6mm To 130 Mm |
| HEX | 5mm To 60mm |
| SQUARE | 4mm To 60mm |
| FLAT | 5mm Min Thickness And Max Width 120mm |
| PROFILES / SECTIONS | AS Per Customer Drawing |
| BILLETS | Up To 200 Mm |
| INGOTS | AS Per Specification |
A Copper Zinc Alloy containing Aluminum and small amount of Arsenic which is added as an inhibitor against dezincification. Inhibited Aluminum brass resists the action of high velocity salt and brackish water and is commonly used for condensor tubes. The outstanding characteristics of aluminum brass is the high resistance to impingement attack. Tubes of this alloy are recommended for use in marine and land power stations where cooling water velocities are high and where inhibited admiralty brass has failed from impingement.
Typical Applications:
Condenser Tube, Evaporator Tubes, Ferrules, Distiller Tubes, Heat Exchanger Tubes
Equivalent Specifications
| SPECIFICATIONS | DESIGNATION |
| ISO | CuZn20Al2 |
| Europen | CuZn20Al2 |
| BS | CZ 110 |
| JIS | C6870 |
| Russian | LAMs77-2-0.05 |
Chemical Composition
| Al | As | Cu | Fe | Pb | Zn | |
| Min/Max | 1.8 – 2.5 | 0.02 – 0.06 | 76.0 – 79.0 | 0.06 | 0.07 | Rem |
| Nominals | 2.0000 | 0.0400 | 77.5000 | – | – | 20.5000 |
Physical Properties
| Coefficient Of Thermal Expansion | 10.3 10−6Per °F (68-572 F) |
| Density | 0.301 Lb/In3 At 68 F |
| Electrical Conductivity | 23 %IACS @ 68 F |
| Electrical Resistivity | 45.1 Ohms-Cmil/Ft @ 68 F |
| Melting Point Liquid US | 1780 F |
| Melting Point Solid US | 1710 F |
| Modulas Of Elasticity In Tension | 16000 Ksi |
| Modulas Of Rigidity | 6000 Ksi |
| Specific Gravity | 8.33 |
| Specific Heat Capacity | 0.09 Btu/Lb/°F @ 68 F |
| Thermal Conductivity | 58.0 BTU In/Hr.Ft2.°F @ 68 F |
Sizes Available
| HOLLOW RODS | Min Bore Size 20 Mm And Max OD 100 Mm |
| ROUND RODS/RODS | 6mm To 130 Mm |
| HEX | 5mm To 60mm |
| SQUARE | 4mm To 60mm |
| FLAT | 5mm Min Thickness And Max Width 120mm |
| PROFILES / SECTIONS | AS Per Customer Drawing |
| BILLETS | Up To 200 Mm |
| INGOTS | AS Per Specification |
A Copper Zinc Alloy containing Aluminum and small amount of Arsenic which is added as an inhibitor against dezincification. Inhibited Aluminum brass resists the action of high velocity salt and brackish water and is commonly used for condensor tubes. The outstanding characteristics of aluminum brass is the high resistance to impingement attack. Tubes of this alloy are recommended for use in marine and land power stations where cooling water velocities are high and where inhibited admiralty brass has failed from impingement.
Typical Applications:
Condenser Tube, Evaporator Tubes, Ferrules, Distiller Tubes, Heat Exchanger Tubes
Equivalent Specifications
| SPECIFICATIONS | DESIGNATION |
| ISO | CuZn20Al2 |
| Europen | CuZn20Al2 |
| BS | CZ 110 |
| JIS | C6870 |
| Russian | LAMs77-2-0.05 |
Chemical Composition
| Al | As | Cu | Fe | Pb | Zn | |
| Min/Max | 1.8 – 2.5 | 0.02 – 0.06 | 76.0 – 79.0 | 0.06 | 0.07 | Rem |
| Nominals | 2.0000 | 0.0400 | 77.5000 | – | – | 20.5000 |
Physical Properties
| Coefficient Of Thermal Expansion | 10.3 10−6Per °F (68-572 F) |
| Density | 0.301 Lb/In3 At 68 F |
| Electrical Conductivity | 23 %IACS @ 68 F |
| Electrical Resistivity | 45.1 Ohms-Cmil/Ft @ 68 F |
| Melting Point Liquid US | 1780 F |
| Melting Point Solid US | 1710 F |
| Modulas Of Elasticity In Tension | 16000 Ksi |
| Modulas Of Rigidity | 6000 Ksi |
| Specific Gravity | 8.33 |
| Specific Heat Capacity | 0.09 Btu/Lb/°F @ 68 F |
| Thermal Conductivity | 58.0 BTU In/Hr.Ft2.°F @ 68 F |
Sizes Available
| HOLLOW RODS | Min Bore Size 20 Mm And Max OD 100 Mm |
| ROUND RODS/RODS | 6mm To 130 Mm |
| HEX | 5mm To 60mm |
| SQUARE | 4mm To 60mm |
| FLAT | 5mm Min Thickness And Max Width 120mm |
| PROFILES / SECTIONS | AS Per Customer Drawing |
| BILLETS | Up To 200 Mm |
| INGOTS | AS Per Specification |
A Copper Zinc Alloy containing Aluminum and small amount of Arsenic which is added as an inhibitor against dezincification. Inhibited Aluminum brass resists the action of high velocity salt and brackish water and is commonly used for condensor tubes. The outstanding characteristics of aluminum brass is the high resistance to impingement attack. Tubes of this alloy are recommended for use in marine and land power stations where cooling water velocities are high and where inhibited admiralty brass has failed from impingement.
Typical Applications:
Condenser Tube, Evaporator Tubes, Ferrules, Distiller Tubes, Heat Exchanger Tubes
Equivalent Specifications
| SPECIFICATIONS | DESIGNATION |
| ISO | CuZn20Al2 |
| Europen | CuZn20Al2 |
| BS | CZ 110 |
| JIS | C6870 |
| Russian | LAMs77-2-0.05 |
Chemical Composition
| Al | As | Cu | Fe | Pb | Zn | |
| Min/Max | 1.8 – 2.5 | 0.02 – 0.06 | 76.0 – 79.0 | 0.06 | 0.07 | Rem |
| Nominals | 2.0000 | 0.0400 | 77.5000 | – | – | 20.5000 |
Physical Properties
| Coefficient Of Thermal Expansion | 10.3 10−6Per °F (68-572 F) |
| Density | 0.301 Lb/In3 At 68 F |
| Electrical Conductivity | 23 %IACS @ 68 F |
| Electrical Resistivity | 45.1 Ohms-Cmil/Ft @ 68 F |
| Melting Point Liquid US | 1780 F |
| Melting Point Solid US | 1710 F |
| Modulas Of Elasticity In Tension | 16000 Ksi |
| Modulas Of Rigidity | 6000 Ksi |
| Specific Gravity | 8.33 |
| Specific Heat Capacity | 0.09 Btu/Lb/°F @ 68 F |
| Thermal Conductivity | 58.0 BTU In/Hr.Ft2.°F @ 68 F |
Sizes Available
| HOLLOW RODS | Min Bore Size 20 Mm And Max OD 100 Mm |
| ROUND RODS/RODS | 6mm To 130 Mm |
| HEX | 5mm To 60mm |
| SQUARE | 4mm To 60mm |
| FLAT | 5mm Min Thickness And Max Width 120mm |
| PROFILES / SECTIONS | AS Per Customer Drawing |
| BILLETS | Up To 200 Mm |
| INGOTS | AS Per Specification |
A Copper Zinc Alloy containing Aluminum and small amount of Arsenic which is added as an inhibitor against dezincification. Inhibited Aluminum brass resists the action of high velocity salt and brackish water and is commonly used for condensor tubes. The outstanding characteristics of aluminum brass is the high resistance to impingement attack. Tubes of this alloy are recommended for use in marine and land power stations where cooling water velocities are high and where inhibited admiralty brass has failed from impingement.
Typical Applications:
Condenser Tube, Evaporator Tubes, Ferrules, Distiller Tubes, Heat Exchanger Tubes
Equivalent Specifications
| SPECIFICATIONS | DESIGNATION |
| ISO | CuZn20Al2 |
| Europen | CuZn20Al2 |
| BS | CZ 110 |
| JIS | C6870 |
| Russian | LAMs77-2-0.05 |
Chemical Composition
| Al | As | Cu | Fe | Pb | Zn | |
| Min/Max | 1.8 – 2.5 | 0.02 – 0.06 | 76.0 – 79.0 | 0.06 | 0.07 | Rem |
| Nominals | 2.0000 | 0.0400 | 77.5000 | – | – | 20.5000 |
Physical Properties
| Coefficient Of Thermal Expansion | 10.3 10−6Per °F (68-572 F) |
| Density | 0.301 Lb/In3 At 68 F |
| Electrical Conductivity | 23 %IACS @ 68 F |
| Electrical Resistivity | 45.1 Ohms-Cmil/Ft @ 68 F |
| Melting Point Liquid US | 1780 F |
| Melting Point Solid US | 1710 F |
| Modulas Of Elasticity In Tension | 16000 Ksi |
| Modulas Of Rigidity | 6000 Ksi |
| Specific Gravity | 8.33 |
| Specific Heat Capacity | 0.09 Btu/Lb/°F @ 68 F |
| Thermal Conductivity | 58.0 BTU In/Hr.Ft2.°F @ 68 F |
Sizes Available
| HOLLOW RODS | Min Bore Size 20 Mm And Max OD 100 Mm |
| ROUND RODS/RODS | 6mm To 130 Mm |
| HEX | 5mm To 60mm |
| SQUARE | 4mm To 60mm |
| FLAT | 5mm Min Thickness And Max Width 120mm |
| PROFILES / SECTIONS | AS Per Customer Drawing |
| BILLETS | Up To 200 Mm |
| INGOTS | AS Per Specification |
A Copper Zinc Alloy containing Aluminum and small amount of Arsenic which is added as an inhibitor against dezincification. Inhibited Aluminum brass resists the action of high velocity salt and brackish water and is commonly used for condensor tubes. The outstanding characteristics of aluminum brass is the high resistance to impingement attack. Tubes of this alloy are recommended for use in marine and land power stations where cooling water velocities are high and where inhibited admiralty brass has failed from impingement.
Typical Applications:
Condenser Tube, Evaporator Tubes, Ferrules, Distiller Tubes, Heat Exchanger Tubes
Equivalent Specifications
| SPECIFICATIONS | DESIGNATION |
| ISO | CuZn20Al2 |
| Europen | CuZn20Al2 |
| BS | CZ 110 |
| JIS | C6870 |
| Russian | LAMs77-2-0.05 |
Chemical Composition
| Al | As | Cu | Fe | Pb | Zn | |
| Min/Max | 1.8 – 2.5 | 0.02 – 0.06 | 76.0 – 79.0 | 0.06 | 0.07 | Rem |
| Nominals | 2.0000 | 0.0400 | 77.5000 | – | – | 20.5000 |
Physical Properties
| Coefficient Of Thermal Expansion | 10.3 10−6Per °F (68-572 F) |
| Density | 0.301 Lb/In3 At 68 F |
| Electrical Conductivity | 23 %IACS @ 68 F |
| Electrical Resistivity | 45.1 Ohms-Cmil/Ft @ 68 F |
| Melting Point Liquid US | 1780 F |
| Melting Point Solid US | 1710 F |
| Modulas Of Elasticity In Tension | 16000 Ksi |
| Modulas Of Rigidity | 6000 Ksi |
| Specific Gravity | 8.33 |
| Specific Heat Capacity | 0.09 Btu/Lb/°F @ 68 F |
| Thermal Conductivity | 58.0 BTU In/Hr.Ft2.°F @ 68 F |
Sizes Available
| HOLLOW RODS | Min Bore Size 20 Mm And Max OD 100 Mm |
| ROUND RODS/RODS | 6mm To 130 Mm |
| HEX | 5mm To 60mm |
| SQUARE | 4mm To 60mm |
| FLAT | 5mm Min Thickness And Max Width 120mm |
| PROFILES / SECTIONS | AS Per Customer Drawing |
| BILLETS | Up To 200 Mm |
| INGOTS | AS Per Specification |
Outer Dia – Imperial: ¼” to 4 ¼” | Outer Dia – Metric: 8 mm to 108 mm
0.8 mm to 3.0 mm
+- .030 mm
As per Suitable to Condensers & Heat Exchangers Design
Soft Annealed, Special tempers on request
End Capped, In Shrinking Wrapped Each Tube, into Wooden Box
74112100
Within 30 days receiving the deposits.
L/C, T/T
