Red Brass Pipes

Description & Documents

Description

CATEGORY	ASTM	BS	EN	JIS	DIN	ISO	IS
Silicon Red Brass	C69400						IS 11109 Grade 1
Silicon Red Brass	C69430						IS 11109 Grade 1
Silicon Brass			CW708R		2.049 Cuzn31Si1
80 / 20 Red Brass	C22000	Cz101	Cw501L		2.023	Cuzn20

Red Brass Pipe

C22000 Red Brass Pipe

CuZn10 has very good cold forming properties and is well suited for e.g. coinage, beating, embossing. This alloy has a higher strength as pure copper. It has good welding and brazing properties as well as a good corrosion resistant and is not fragile to stress corrosion and dezincification. CuZn10 is principally used in jewelry, metal goods, and watch industry and in electronic industry for installation parts. We produce qualities with grain sizes below 5 mm if needed.

Typical Applications:

Architecture: Weather Stripping, Screen Cloth, Ornamental Trim, Etching Bronze, Grill Work. Builders Hardware: Kick Plates, Hardware. Consumer: Housing for Lipstick Compacts, Costume Jewelry, Caskets, Ball Point Pens. Electrical: Wave Guides, Rotor Bar-AC Motors, Cable Warp. Fasteners: Screw Shells, Bolts, Line Clamps, Rivets. Industrial: Base for Vitreous Enamel, Escutcheons, Flexible Tube, Studs. Marine: Marine Hardware. Ordnance: Small Arms Cartridges, Artillery Projectile Rotating Bands, Press Fit, Primer Caps. Plumbing: Plumbers Brass Goods Typical Applications: Jewelry and metal good, Components for the electrical industry, Lead frames.

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
EN	CuZn10
DIN	CW501L
UNS	C22000
BS	CZ101

Chemical Composition

	Cu	Pb	Fe	Zn
Min/Max	89.0-91.0	0.05	0.05	Rem
Nominals	90.0	–	–	10.0

Physical Properties

Density	0.318 Lb/In3 At 68 F
Electrical Conductivity	44 %IACS @ 68 F
Thermal Conductivity	109 BTU In/Hr.Ft².°F @ 68 F

Mechanical Properties

Temper	Tensile Strength Rm [Ksi] [MPa]	Yield Strength Rp0.2 Nominal [Ksi] [MPa]	Elon Gation 2â€ Nominal [%]	Hardness Nominal R30T HV	Min Bend Ratio 90Â°		Min Bend Ratio 180Â°
Temper	Tensile Strength Rm [Ksi] [MPa]	Yield Strength Rp0.2 Nominal [Ksi] [MPa]	Elon Gation 2â€ Nominal [%]	Hardness Nominal R30T HV	GW	BW	GW	BW
Soft	36-42 248-290	12 83	47		0	0	0	0
H02	47-57 324-393	47 324	12	57	0	0	1.0	1.0
H04	57-66 393-455	58 400	4	66	0	1.0	1.5	3.0
H06	64-72 441-497	63 435	4	68	1.0	2.0	1.5
H06	64-72 441-497	63 435	4	68	1.0	2.0	1.5
H08	69-77 476-531	68 469	1	69	1.5		2.0
H10	72-80 497-552	70 483	1	70	1.5		3.0

Sizes Available

ROUND RODS/RODS	6mm To 130 Mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS	AS Per Customer Drawing
BILLETS	Up To 200 Mm
INGOTS	AS Per Specification

CATEGORY	ASTM	BS	EN	JIS	DIN	ISO	IS
85 / 15 Red Brass	C23000	Cz102	Cw502L		2.024	Cuzn15

C23000 Red Brass Pipe

23000 brass is the most durable of all metals for commercial water pipe in the practical price range. Excellent for its resistance to dezincification and season cracking for which the high copper brasses are known. Moderate strength and good retention of spring properties. Specified for underground service lines since it offers greatest corrosion resistance to all types of portable waters. Applications for C23000 brass include costume jewelry, fire hose couplings, zippers, and condenser and heat exchanger tubes. Popular as an outdoor metal and has found for itself a very important place in modern architecture. also known as Nordic Brass. The EN equivalent for this alloy is CuZn15.

Typical Applications:

Architecture: etching parts, trim, weather strip, Builders Hardware: kick plates, Consumer: badges, coinage, compacts, costume jewelry, dials, fire extinguisher cases, lipstick containers, medallions, nameplates, plaques, rouge boxes, tokens, zippers, Electrical: conduit, rotor bars (AC motors), screw shells, sockets Fasteners: eyelets, fasteners, Industrial: condenser tubes, fire extinguishers, flexible metal hose, heat exchanger shells, heat exchangers, pickling crates, pump cylinder liners, radiator cores, tags, tubing for heat exchangers, tubing for instrumentation, Other fire hose couplings Plumbing fittings, j-bends, pipe, pipe nipples, pipe service lines, pump lines, service lines, traps

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
EN	CuZn15
DIN	CW502L
UNS	C23000
BS	CZ102

Chemical Composition

	Cu	Pb	Fe	Zn
Min/Max	84.0-86.0	0.05	0.05	Rem
Nominals	85.0	–	–	5.0

Physical Properties

Density	0.316 Lb/In3 At 68 F
Electrical Conductivity	37 %IACS @ 68 F
Thermal Conductivity	92 BTU In/Hr.Ft².°F @ 68°F

Mechanical Properties

Temper	Tensile Strength Rm [Ksi] [MPa]	Yield Strength Rp0.2 Nominal [Ksi] [MPa]	Elon Gation 2â€ Nominal [%]	Hardness Nominal R30T HV	Min Bend Ratio 90Â°		Min Bend Ratio 180Â°
Temper	Tensile Strength Rm [Ksi] [MPa]	Yield Strength Rp0.2 Nominal [Ksi] [MPa]	Elon Gation 2â€ Nominal [%]	Hardness Nominal R30T HV	GW	BW	GW	BW
Soft	39-47 269-324	13 90	45	–	0	0	0	0
H02	51-61 352-421	49 338	18	105	0	0	0.5	1.5
H04	63-72 435-497	62 428	7	135	0	1.5	2.0	4.0
H06	72-80 497-552	69 476	4	150	1.5	–	2.5	–
H08	78-86 538-593	73 504	3	160	2.5	–	4.0	–
H10	82-90 566-621	76 524	1	170	–	–	–	–

Sizes Available

ROUND RODS/RODS	6mm To 130 Mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS	AS Per Customer Drawing
BILLETS	Up To 200 Mm
INGOTS	AS Per Specification

C24000 Red Brass Pipe

Red Brass with a nominal composition of 80 % copper and 20 % zinc approaches the mechanical properties of CuZn30 but with corrosion properties only slightly inferior to CuZn15. This alloy has a color between yellow and golden red and finds distinctive uses in decorative trim applications. Its color and tonal qualities prove advantageous for musical instruments. Thermostatic and instrument bellows and flexible hose utilize the combined ductility, strength and corrosion resistance characteristics of this alloy.

Typical Applications:

Architecture: medallions, ornamental components, spandrels Builders Hardware: decorative panels Consumer: clock dials, musical instrument parts, plaques Electrical: battery caps, rotor bars for AC motors Industrial: flexible hose, flexible hose bellows, pump lines, welding wire other tokens

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
EN	CuZn20
DIN	CW503L
UNS	C24000
BS	CZ103

Chemical Composition

	Cu	Pb	Fe	Zn
Min/Max	78.5-81.5	0.05	0.05	Rem
Nominals	80.0	–	–	20.0

Physical Properties

Density	0.313 Lb/In3 At 68 F
Electrical Conductivity	32 %IACS @ 68 F
Thermal Conductivity	81 BTU In/Hr.Ft².°F @ 68 F

Mechanical Properties –

Temper	Tensile Strength Rm [Ksi] [MPa]	Yield Strength Rp0.2 Nominal [Ksi] [MPa]	Elon Gation 2â€ Nominal [%]	Hardness Nominal R30T HV	Min Bend Ratio 90Â°		Min Bend Ratio 180Â°
Temper	Tensile Strength Rm [Ksi] [MPa]	Yield Strength Rp0.2 Nominal [Ksi] [MPa]	Elon Gation 2â€ Nominal [%]	Hardness Nominal R30T HV	GW	BW	GW	BW
Soft	44-54 305-373	20 138	50	–	0	0	0	0
H02	55-65 379-448	42 290	18	62	0	0	1.0	1.5
H04	68-77 469-531	61 421	4	71	0	0	1.5	3.0
H06	78-87 538-600	68 469	2	75	0.5	1.5	2.0
H08	85-93 586-642	76 524	1	77	1.5	–	4.0	–
H10	89-97 614-669	78 548	1	78	3.0	–	–	–

Sizes Available

ROUND RODS/RODS	6mm To 130 Mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS	AS Per Customer Drawing
BILLETS	Up To 200 Mm
INGOTS	AS Per Specification

C69400 Silicon Red Brass Pipe

Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Applications:

Condenser Tube, Evaporator Tubes, Ferrules, Distiller Tubes, Heat Exchanger Tubes

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
ISO	CuZn20Al2
Europen	CuZn20Al2
BS	CZ 110
JIS	C6870
Russian	LAMs77-2-0.05

Chemical Composition

	Cu	Fe	Pb	Sn	Zn
Min/Max	80-83	0.2 Max	0.3 Max	3.5-4.5	Rem

Physical Properties

Tensile Strength Up To 25mm	550 MPA
Elongation	15% Min

Sizes Available

WIRE	1mm To 8mm
HOLLOW RODS	Min Bore Size 20 Mm And Max OD 100 Mm
ROUND RODS/RODS	6mm To 130 Mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS	AS Per Customer Drawing
BILLETS	Up To 200 Mm
INGOTS	AS Per Specification

CATEGORY	ASTM	BS	EN	JIS	DIN	ISO	IS
90 / 10 Red Brass	C24000	Cz103	Cw503L		2.025	Cuzn10

90/10 Red Brass Tubes

Typical Applications:

Architecture: Weather Stripping, Screen Cloth, Ornamental Trim, Etching Bronze, Grill Work. Builders Hardware: Kick Plates, Hardware. Consumer: Housing for Lipstick Compacts, Costume Jewelry, Caskets, Ball Point Pens. Electrical: Wave Guides, Rotor Bar-AC Motors, Cable Warp. Fasteners: Screw Shells, Bolts, Line Clamps, Rivets. Industrial: Base for Vitreous Enamel, Escutcheons, Flexible Tube, Studs. Marine: Marine Hardware. Ordnance: Small Arms Cartridges, Artillery Projectile Rotating Bands, Press Fit, Primer Caps. Plumbing: Plumbers Brass Goods Typical Applications: Jewelry and metal good, Components for the electrical industry, Lead frames.

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
EN	CuZn10
DIN	CW501L
UNS	C22000
BS	CZ101

Chemical Composition

	Cu	Pb	Fe	Zn
Min/Max	89.0-91.0	0.05	0.05	Rem
Nominals	90.0	–	–	10.0

Physical Properties

Density	0.318 Lb/In3 At 68 F
Electrical Conductivity	44 %IACS @ 68 F
Thermal Conductivity	109 BTU In/Hr.Ft².°F @ 68 F

Mechanical Properties

Temper	Tensile Strength Rm [Ksi] [MPa]	Yield Strength Rp0.2 Nominal [Ksi] [MPa]	Elon Gation 2â€ Nominal [%]	Hardness Nominal R30T HV	Min Bend Ratio 90Â°		Min Bend Ratio 180Â°
Temper	Tensile Strength Rm [Ksi] [MPa]	Yield Strength Rp0.2 Nominal [Ksi] [MPa]	Elon Gation 2â€ Nominal [%]	Hardness Nominal R30T HV	GW	BW	GW	BW
Soft	36-42 248-290	12 83	47		0	0	0	0
H02	47-57 324-393	47 324	12	57	0	0	1.0	1.0
H04	57-66 393-455	58 400	4	66	0	1.0	1.5	3.0
H06	64-72 441-497	63 435	4	68	1.0	2.0	1.5
H06	64-72 441-497	63 435	4	68	1.0	2.0	1.5
H08	69-77 476-531	68 469	1	69	1.5		2.0
H10	72-80 497-552	70 483	1	70	1.5		3.0

Sizes Available

ROUND RODS/RODS	6mm To 130 Mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS	AS Per Customer Drawing
BILLETS	Up To 200 Mm
INGOTS	AS Per Specification

85/15 Red Brass Tubes

C23000 brass is the most durable of all metals for commercial water pipe in the practical price range. Excellent for its resistance to dezincification and season cracking for which the high copper brasses are known. Moderate strength and good retention of spring properties. Specified for underground service lines since it offers greatest corrosion resistance to all types of portable waters. Applications for C23000 brass include costume jewelry, fire hose couplings, zippers, and condenser and heat exchanger tubes. Popular as an outdoor metal and has found for itself a very important place in modern architecture. also known as Nordic Brass. The EN equivalent for this alloy is CuZn15.

Typical Applications:

Architecture: etching parts, trim, weather strip, Builders Hardware: kick plates, Consumer: badges, coinage, compacts, costume jewelry, dials, fire extinguisher cases, lipstick containers, medallions, nameplates, plaques, rouge boxes, tokens, zippers, Electrical: conduit, rotor bars (AC motors), screw shells, sockets Fasteners: eyelets, fasteners, Industrial: condenser tubes, fire extinguishers, flexible metal hose, heat exchanger shells, heat exchangers, pickling crates, pump cylinder liners, radiator cores, tags, tubing for heat exchangers, tubing for instrumentation, Other fire hose couplings Plumbing fittings, j-bends, pipe, pipe nipples, pipe service lines, pump lines, service lines, traps

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
EN	CuZn15
DIN	CW502L
UNS	C23000
BS	CZ102

Chemical Composition

	Cu	Pb	Fe	Zn
Min/Max	84.0-86.0	0.05	0.05	Rem
Nominals	85.0	–	–	5.0

Physical Properties

Density	0.316 Lb/In3 At 68 F
Electrical Conductivity	37 %IACS @ 68 F
Thermal Conductivity	92 BTU In/Hr.Ft².°F @ 68°F

Mechanical Properties

Temper	Tensile Strength Rm [Ksi] [MPa]	Yield Strength Rp0.2 Nominal [Ksi] [MPa]	Elon Gation 2â€ Nominal [%]	Hardness Nominal R30T HV	Min Bend Ratio 90Â°		Min Bend Ratio 180Â°
Temper	Tensile Strength Rm [Ksi] [MPa]	Yield Strength Rp0.2 Nominal [Ksi] [MPa]	Elon Gation 2â€ Nominal [%]	Hardness Nominal R30T HV	GW	BW	GW	BW
Soft	39-47 269-324	13 90	45	–	0	0	0	0
H02	51-61 352-421	49 338	18	105	0	0	0.5	1.5
H04	63-72 435-497	62 428	7	135	0	1.5	2.0	4.0
H06	72-80 497-552	69 476	4	150	1.5	–	2.5	–
H08	78-86 538-593	73 504	3	160	2.5	–	4.0	–
H10	82-90 566-621	76 524	1	170	–	–	–	–

Sizes Available

ROUND RODS/RODS	6mm To 130 Mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS	AS Per Customer Drawing
BILLETS	Up To 200 Mm
INGOTS	AS Per Specification

80/20 Red Brass Tubes

Typical Applications:

Architecture: medallions, ornamental components, spandrels Builders Hardware: decorative panels Consumer: clock dials, musical instrument parts, plaques Electrical: battery caps, rotor bars for AC motors Industrial: flexible hose, flexible hose bellows, pump lines, welding wire other tokens

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
EN	CuZn20
DIN	CW503L
UNS	C24000
BS	CZ103

Chemical Composition

	Cu	Pb	Fe	Zn
Min/Max	78.5-81.5	0.05	0.05	Rem
Nominals	80.0	–	–	20.0

Physical Properties

Density	0.313 Lb/In3 At 68 F
Electrical Conductivity	32 %IACS @ 68 F
Thermal Conductivity	81 BTU In/Hr.Ft².°F @ 68 F

Mechanical Properties –

Temper	Tensile Strength Rm [Ksi] [MPa]	Yield Strength Rp0.2 Nominal [Ksi] [MPa]	Elon Gation 2â€ Nominal [%]	Hardness Nominal R30T HV	Min Bend Ratio 90Â°		Min Bend Ratio 180Â°
Temper	Tensile Strength Rm [Ksi] [MPa]	Yield Strength Rp0.2 Nominal [Ksi] [MPa]	Elon Gation 2â€ Nominal [%]	Hardness Nominal R30T HV	GW	BW	GW	BW
Soft	44-54 305-373	20 138	50	–	0	0	0	0
H02	55-65 379-448	42 290	18	62	0	0	1.0	1.5
H04	68-77 469-531	61 421	4	71	0	0	1.5	3.0
H06	78-87 538-600	68 469	2	75	0.5	1.5	2.0
H08	85-93 586-642	76 524	1	77	1.5	–	4.0	–
H10	89-97 614-669	78 548	1	78	3.0	–	–	–

Sizes Available

ROUND RODS/RODS	6mm To 130 Mm
HEX	5mm To 60mm
SQUARE	4mm To 60mm
FLAT	5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS	AS Per Customer Drawing
BILLETS	Up To 200 Mm
INGOTS	AS Per Specification

Astm B134 Red Brass Tubes

Typical Applications:

Architecture: medallions, ornamental components, spandrels Builders Hardware: decorative panels Consumer: clock dials, musical instrument parts, plaques Electrical: battery caps, rotor bars for AC motors Industrial: flexible hose, flexible hose bellows, pump lines, welding wire other tokens

Equivalent Specifications

SPECIFICATIONS	DESIGNATION
EN	CuZn20
DIN	CW503L
UNS	C24000
BS	CZ103

Chemical Composition

	Cu	Pb	Fe	Zn
Min/Max	78.5-81.5	0.05	0.05	Rem
Nominals	80.0	–	–	20.0

Physical Properties

Density	0.313 Lb/In3 At 68 F
Electrical Conductivity	32 %IACS @ 68 F
Thermal Conductivity	81 BTU In/Hr.Ft².°F @ 68 F

Mechanical Properties –

Temper	Tensile Strength Rm [Ksi] [MPa]	Yield Strength Rp0.2 Nominal [Ksi] [MPa]	Elon Gation 2â€ Nominal [%]	Hardness Nominal R30T HV	Min Bend Ratio 90Â°		Min Bend Ratio 180Â°
Temper	Tensile Strength Rm [Ksi] [MPa]	Yield Strength Rp0.2 Nominal [Ksi] [MPa]	Elon Gation 2â€ Nominal [%]	Hardness Nominal R30T HV	GW	BW	GW	BW
Soft	44-54 305-373	20 138	50	–	0	0	0	0
H02	55-65 379-448	42 290	18	62	0	0	1.0	1.5
H04	68-77 469-531	61 421	4	71	0	0	1.5	3.0
H06	78-87 538-600	68 469	2	75	0.5	1.5	2.0
H08	85-93 586-642	76 524	1	77	1.5	–	4.0	–
H10	89-97 614-669	78 548	1	78	3.0	–	–	–

Sizes Available

ROUND RODS/RODS	1mm To 130 Mm
HEX	5mm To 60mm
SQUARE	5mm To 60mm
FLAT	5mm Min Thickness And Max Width 120mm
BILLETS	Up To 200 Mm
TUBES	9.5 Mm To 76.20 Mm

Red Brass Pipes

Description

Red Brass Pipe

C24000 Red Brass Pipe

C69400 Silicon Red Brass Pipe

85/15 Red Brass Tubes

80/20 Red Brass Tubes

Astm B134 Red Brass Tubes

Latest Product