Manufacturer : Condenser and Heat Exchanger Tubes, Pipes
Home Brass Leaded Hollow Tubes
product-details

Brass Leaded Hollow Tubes

Description & Documents  

Description

Leaded Brass Hollow Rods

CATEGORY ASTM BS EN JIS DIN ISO IS
High Leaded Brass C34500 CZ131
CZ119		 CW601N
Cuzn35pb2		 C3560 2.0331 CuZn34Pb2

High Leaded Brass Hollow Rods

Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Applications:

  • Industrial: Pinions, Gears, Valve Stems, Flare Fittings, Adapters, Couplings
  • Plumbing: Plumbing Fittings, Plumbers’ Brass Goods
Equivalent Specifications

SPECIFICATIONS DESIGNATION
ISO CuZn34Pb2
Europen CuZn34Pb2
JIS C3560
Russian LS63-2

Chemical Composition

Cu Fe Pb Zn
Min/Max 59.0 – 63.0 0.07 0.3 Rem
Nominals 60.0000 – – 40.0000

Physical Properties

Coefficient Of Thermal Expansion 11.60 10−6Per °F (68-572 F)
Density 0.303 Lb/In3 @ 68 F
Electrical Conductivity 28 %IACS @ 68 F
Electrical Resistivity 37.0 Ohms-Cmil/Ft @ 68 F
Melting Point Liquid US 1660 F
Melting Point Solid US 1650 F
Modulas Of Elasticity In Tension 15000 Ksi
Modulas Of Rigidity 5600 Ksi
Specific Gravity 8.39
Specific Heat Capacity 0.09 Btu/Lb/°F @ 68 F
Thermal Conductivity 71.0 BTU In/Hr.Ft2.°F @ 68 F

Sizes Available

WIRE 1mm To 8mm
HOLLOW RODS Min Bore Size 20 Mm And Max OD 100 Mm
ROUND RODS/RODS 6mm To 130 Mm
HEX 5mm To 60mm
SQUARE 4mm To 60mm
FLAT 5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS AS Per Customer Drawing
BILLETS Up To 200 Mm
INGOTS AS Per Specification
CATEGORY
 ASTM BS EN JIS DIN ISO IS
Forging Brass C37700 CZ120 CW608N
CW617N		 C3771 BE 2.038 1634-CuZn38Pb2 IS3488
IS6912 FLB

Forging Brass Hollow Rods

The exceptional hot working characteristics of C37700 makes it the classic alloy for forgings. With outstanding flow characteristics, this alloy can be forged and machined into sophisticated and most complex components. C37700 can also easily be electroplated with various finishes.

Typical Applications:

  • BUILDERS HARDWARE: Door Handles, Decorative Knobs, Furniture Hardware
  • BUILDING: Valve Bodies for Refrigeration, Chemicals
  • CONSUMER: Golf Putters, Valve Bodies for Scuba & Propane Spray Tanks, Valve Bodies for Agricultural Spray Tanks
  • ELECTRICAL: Covers, Fuse Bodies
  • INDUSTRIAL: Valve Components, Forgings and Pressings of All Kinds
Equivalent Specifications

SPECIFICATIONS DESIGNATION
ISO CuZn40Pb2
Europen CuZn40Pb2
BS CZ-122
JIS C 3561
Russian LS59-3

Chemical Composition

Cu Fe Pb Zn
Min/Max 58.0 – 61.0 0.3 1.5 – 2.5 Rem
Nominals 59.5000 – 2.0000 38.0000

Physical Properties

Coefficient Of Thermal Expansion 11.5 10−6Per °F (68-572 F)
Density 0.305 Lb/In3 @ 68 F
Electrical Conductivity 27 %IACS @ 68 F
Electrical Resistivity 38.4 Ohms-Cmil/Ft @ 68 F
Melting Point Liquid US 1640 F
Melting Point Solid US 1620 F
Modulas Of Elasticity In Tension 15000 Ksi
Modulas Of Rigidity 5600 Ksi
Specific Gravity 8.44
Specific Heat Capacity 0.09 Btu/Lb/°F @ 68 F
Thermal Conductivity 69.0 BTU In/Hr.Ft2.°F @ 68 F

Sizes Available

HOLLOW RODS Min Bore Size 20 Mm And Max OD 100 Mm
ROUND RODS/RODS 6mm To 130 Mm
HEX 5mm To 60mm
SQUARE 4mm To 60mm
FLAT 5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS AS Per Customer Drawing
BILLETS Up To 200 Mm
INGOTS AS Per Specification
CATEGORY
 ASTM BS EN JIS DIN ISO IS
Threaded Rolling Brass C35300 CZ119 CW606N
Cw602n		 H3260(92) C3501 W CuZn44Pb2 1639-CuZn43Pb2

Threaded Rolling Brass Hollow Rods

Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping

Typical Applications:

  • Builders Hardware: Drawer Pulls, Hinges, Drawer Handles
  • Consumer: Bicycle Spoke Nipples, Clock and Watch Parts, Clock Plates and Nuts, Key Blanks
  • Fasteners: Nuts, Rivets, Screws
  • Industrial: Ratchets, Instrument Backs, Automatic Screw Machine Parts, Valve Stems, Pinions, Flare Fittings, Couplings, Bearing Cages, Channel Plate, Wheels, Gears, Adapters
  • Other: Engravers Plate
  • Plumbing: Faucet Seats, Faucet Stems, Pipe Fittings, Plumbers Fittings, Plumbers’ Brass Goods
Equivalent Specifications

SPECIFICATIONS DESIGNATION
ISO CuZn37Pb2
Europen CuZn37Pb2
BS Cz119

Chemical Composition

Cu Fe Pb Zn
Min/Max 60.0-63.0 .15 1.5-2.5 Rem.
Nominals 61.5 – 2.0 36.5

Physical Properties

Coefficient Of Thermal Expansion 11.30 10−6Per °F (68-572 F)
Density 0.306 Lb/In3 At 68 F
Electrical Conductivity 26 %IACS @ 68 F
Electrical Resistivity 39.9 Ohms-Cmil/Ft @ 68 F
Melting Point Liquid US 1670 F
Melting Point Solid US 1630 F
Modulas Of Elasticity In Tension 15000 Ksi
Modulas Of Rigidity 5600 Ksi
Specific Gravity 8.470
Thermal Conductivity 67 BTU In/Hr.Ft2.°F @ 68 F

Sizes Available

WIRE 1mm To 8mm
HOLLOW RODS Min Bore Size 20 Mm And Max OD 100 Mm
ROUND RODS/RODS 6mm To 130 Mm
HEX 5mm To 60mm
SQUARE 4mm To 60mm
FLAT 5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS AS Per Customer Drawing
BILLETS Up To 200 Mm
INGOTS AS Per Specification
CATEGORY
 ASTM BS EN JIS DIN ISO IS
Free Machining Brass C36000 CZ124 CW603N C3601 2.0375 CuZn36Pb3
Free Machining Brass C36010 CZ124 Cw603N C3604

Free Machining Brass Hollow Rods

C36000 Free Machining Brass / Free Cutting Brass is ideally suited for high speed machining operations with its superior machinability, thread rolling and knurling characteristics. Its machinability rating of 100 is standard against which all other copper alloys are rated. It is easily soldered or brazed and has good resistance to corrosion.

Typical Applications:

  • BUILDERS HARDWARE: Lock Bodies, Hardware, Fittings CONSUMER: Hot Combs (to Straighten Hair)
  • FASTENERS: Bolts, Nuts, Screws
  • INDUSTRIAL: Faucet Components, Pneumatic Fittings, Fluid Connectors, Automatic Screw Machine Parts, Unions, Adapters, Screw Machine Products, Gauges, Valve Seats, Valve Trim, Valve Stems, Nozzles, Pinions, Gears
  • PLUMBING: Plumbers’ Brass Goods, Faucet Stems, Faucet Seats, Plumbing Fittings
Equivalent Specifications

SPECIFICATIONS DESIGNATION
ISO CuZn36Pb3
Europen CuZn36Pb3
BS CZ-124
Russian LS63-3

Chemical Composition

Cu Fe Pb Zn
Min/Max 60.0 – 63.0 0.35 2.5 – 3.7 Rem
Nominals 61.5000 – 3.1000 35.4000

Physical Properties

Coefficient Of Thermal Expansion 11.4 10−6Per °F (68-572 F)
Density 0.307 Lb/In3 @ 68 F
Electrical Conductivity 26 %IACS @ 68 F
Electrical Resistivity 39.9 Ohms-Cmil/Ft @ 68 F
Melting Point Liquid US 1650 F
Melting Point Solid US 1630 F
Modulas Of Elasticity In Tension 14000 Ksi
Modulas Of Rigidity 5300 Ksi
Specific Gravity 8.41
Specific Heat Capacity 0.09 Btu/Lb/°F @ 68 F
Thermal Conductivity 67.0 BTU In/Hr.Ft2.°F @ 68 F

Sizes Available

WIRE 1mm To 8mm
HOLLOW RODS Min Bore Size 20 Mm And Max OD 100 Mm
ROUND RODS/RODS 6mm To 130 Mm
HEX 5mm To 60mm
SQUARE 4mm To 60mm
FLAT 5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS AS Per Customer Drawing
BILLETS Up To 200 Mm
INGOTS AS Per Specification
CATEGORY
 ASTM BS EN JIS DIN ISO IS
Architectural Bronze C38000 CZ122 CW618N H3100 C3561 CuZn39Pb2 1634-CuZn39Sn1

Architechtural Brass Hollow Bar

Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Applications:

  • ARCHITECTURE: Thresholds, Architectural Sections, Door Frames, Window Frames
  • BUILDERS HARDWARE: Hinges, Builders Hardware, Butts
  • OTHER: Extruded Shapes
Equivalent Specifications

SPECIFICATIONS DESIGNATION
ISO CuZn40Pb2
Europen CuZn40Pb2
BS CZ-122
JIS C 3561
Russian LS59-3

Chemical Composition

Ai Cu Fe Pb Sn Zn
Min/Max 0.5 55.0 – 60.0 0.35 1.5 – 2.5 0.3 Rem
Nominals – 57.5000 – 2.0000 – –

Physical Properties

Coefficient Of Thermal Expansion 11.5 10−6Per °F (68-572 F)S
Density 0.305 Lb/In3 @ 68 F
Electrical Conductivity 27 %IACS @ 68 F
Electrical Resistivity 38.4 Ohms-Cmil/Ft @ 68 F
Melting Point Liquid US 1640 F
Melting Point Solid US 1620 F
Modulas Of Elasticity In Tension 15000 Ksi
Modulas Of Rigidity 5600 Ksi
Specific Gravity 8.44
Specific Heat Capacity 0.09 Btu/Lb/°F @ 68 F
Thermal Conductivity 69.0 BTU In/Hr.Ft2.°F @ 68°F

Sizes Available

HOLLOW RODS Min Bore Size 20 Mm And Max OD 100 Mm
ROUND RODS/RODS 6mm To 130 Mm
HEX 5mm To 60mm
SQUARE 4mm To 60mm
FLAT 5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS AS Per Customer Drawing
BILLETS Up To 200 Mm
INGOTS AS Per Specification
CATEGORY
 ASTM BS EN JIS DIN ISO IS
Free Cutting Muntz Metal C37000 CZ124 CW607N H3100(92)C3713 2.0372 IS 319 Grade 1

Free Cutting Muntz Brass Hollow Bar

Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Applications:

  • Typical Uses: Industrial, Automotive Screw Machine Parts
Equivalent Specifications

SPECIFICATIONS DESIGNATION
Europen CuZn38Pb1
BS CZ-129
Portugies CuZn39Pb1
Russian LS63-3

Chemical Composition

Cu Fe Pb Zn
Min/Max 59.0 – 62.0 0-0.15 0.8-1.5 Rem
Nominals 61.5000 – 1.0 –

Physical Properties

Coefficient Of Thermal Expansion 11.60 10−6Per °F (68-572 F)
Density 0.304 Lb/In3 @ 68 F
Electrical Conductivity 27 %IACS @ 68 F
Melting Point Liquid US 1650 F
Melting Point Solid US 1630 F
Modulas Of Elasticity In Tension 15000 Ksi
Modulas Of Rigidity 5600 Ksi
Specific Gravity 8.41
Specific Heat Capacity 0.09 Btu/Lb/°F @ 68 F
Thermal Conductivity 69.0 BTU In/Hr.Ft2.°F @ 68°F

Sizes Available

HOLLOW RODS Min Bore Size 20 Mm And Max OD 100 Mm
ROUND RODS/RODS 6mm To 130 Mm
HEX 5mm To 60mm
SQUARE 4mm To 60mm
FLAT 5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS AS Per Customer Drawing
BILLETS Up To 200 Mm
INGOTS AS Per Specification

Is 319 Brass Hollow Bar

Excellent hot and cold workability; good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Applications:

  • ARCHITECTURE: Elevator Trim, Thresholds, Door Frames, Handrails, Terrazzo Strip, Shower Doors, Privacy Sun Grills, Trim, Store Fronts, Architectural Forgings, extrusions, Architectural Moldings, Window Mullions, Bathroom Partition Brackets
  • BUILDERS HARDWARE: Hinges, Drawer Pulls, Lock Cams, butts, Slide Bolts, Lock Bodies, Drawer Handles
  • CONSUMER: Picture Frames, Funeral Urns, Lamps, Fireplace Screens, Straight Edges, Handles, Hot Combs (to straighten hair), Squeegee Retainers
  • INDUSTRIAL: Valve Trim, Press Brake Ram Clamps, Valve Stems, Valves, Gauges, Valve Seats, Forgings, Wheeled Racks
Equivalent Specifications

SPECIFICATIONS DESIGNATION
ISO CuZn39Pb3
Europen CuZn39Pb3
BS CZ-121
JIS C 3561
Russian LS59-3

Chemical Composition

Cu As Pb Zn
Min/Max 55.0 – 59.0 0.35 2.5 – 3.5 Rem
Nominals 57.0000 – 3.0000 40.0000

Physical Properties

Coefficient Of Thermal Expansion 11.65 10−6Per °F (68-572 F)
Density 0.306 Lb/In3 @ 68 F
Electrical Conductivity 28 %IACS @ 68 F
Electrical Resistivity 37 Ohms-Cmil/Ft @ 68 F
Melting Point Liquid US 1630 F
Melting Point Solid US 1610 F
Modulas Of Elasticity In Tension 14000 Ksi
Modulas Of Rigidity 5300 Ksi
Specific Gravity 8.47
Specific Heat Capacity 0.09 Btu/Lb/°F @ 68 F
Thermal Conductivity 71.0 BTU In/Hr.Ft2.°F @ 68 F

Sizes Available

HOLLOW RODS Min Bore Size 20 Mm And Max OD 100 Mm
ROUND RODS/RODS 6mm To 130 Mm
HEX 5mm To 60mm
SQUARE 4mm To 60mm
FLAT 5mm Min Thickness And Max Width 120mm
PROFILES / SECTIONS AS Per Customer Drawing
BILLETS Up To 200 Mm
INGOTS AS Per Specification

Cw713r Brass Hollow Bar

We are a leading and well recognized names in the field of offering quality finished range of High Tensile Hollow Rods that are as per ASTM B505 C95200, ASTM B148 C95200, ASTM B271 C95200. Also meeting the specifications as per BS 1400 AB1, SAE 68a, UNI 5273, DIN 1714 GK CuAl10Fe 2.0940.02, CuAl10Fe2-C, IS 3.5 AB1. These are made available in annealed finish in sizes of 6 to 15, 15 to 50, 50 to 80 and 80 and above. These bronze rods have excellent capacity to be cold and hot formed and have machine-ability rating of 50%. Further, the rods have Forge-ability rating of 75 %, fair suitability for brazing and good welding capability.

Advantages:

  • Excellent capacity to be cold and hot formed
  • Good Hardness
  • Excellent capability for brazing and plating
  • Excellent welding capability
  • Improved corrosion resistance
  • Non sparking alloy
  • Increased wear and heat resistance

Applications:

  • AutomobileBushing
  • For worm Gears
  • Valve stems
  • High pressure valves
  • Marine Pump Hardware & Bearings
  • Valve guides and seats, Nuts, Shafts, Bolts & Threaded parts for Ship building Industry
Equivalent Specifications

SPECIFICATIONS DESIGNATION
ASTM CW713R
BS CZ135
EN CuZn37MnAL2PbSi
Din 2.0550 (CuZn40AL2)
ISO 1338-CuAl10Fe2

Chemical Composition

Cu PB SN ZN SI NI Fe Al
Min/Max 57 – 59 0.2 – 0.8 MAX 0.4 REM 0.3 €“ 1.3 MAX 1.0 MAX1.0 1.3 €“ 2.3

Physical Properties

Condition Size T.S.Kg/Mm EL % Min
Annealed / As Manufactured 6 To 15
15 TO 50
50 TO 80
80 & Above		 700
700
680
650		 10%
12%
12%
12%

Fabrication Properties

Capacity For Being –
Cold Formed Poor
Hot Formed Good
Machinability Rating 30%
Forging Rating 75%
Suitability For Soldering Poor
Suitability For Brazing Fair
Suitability For Welding Good

Uses
Excellent for corrosion resistant, Highest strength, Increased wear and heat resistance, Like marine pump hardware & bearings, Valve guides & seats, Nuts, Shaft, Bolts & Threaded Parts for Ship building & power generation industries.

 

Latest Product

24 x 7 Product Expert Help Support
We accept Custom Grades
+91-93281 05180
whatsapp